NANCY

Project Data

One project record carried through the workflow: field log, boring log, laboratory results, design parameters and analyses, the data report and the geotechnical report. Everything stays in your own browser.

PHASE IProjectProject information, site description, geologic setting and reconnaissance findings.PHASE IIIField LogBorings and samples: SPT blow counts, hammer energy ratio, N60, recovery, groundwater and field descriptions.PHASE IIIBoring LogDivide each boring into strata and draw the graphic log from the field data.PHASE IVLaboratory ResultsIndex, strength, consolidation and compaction results for each sample, with a USCS check.PHASE VDesign ParametersTested, assumed and selected values for each stratum, the analysis inputs and the completed analyses.PHASE VIData ReportThe project data and completed analyses compiled into a printable report, up to the conclusions and recommendations.PHASE VIIGeotechnical ReportThe data report with drafted conclusions and recommendations for the engineer of record to review, sign and seal.

How the project record works

Each page edits the same project. Borings and samples entered on the Field Log appear on the Boring Log; laboratory results attach to samples; strata with the same USCS group and name become design strata; and the Data Report compiles it all.

Your data stays on your device. The project is saved automatically in this browser only. Use Save file to keep a copy or move it to another computer, and Open file to load it again. Clearing your browser data deletes the stored project.

Use is subject to the Use and Disclaimers. Values are for organizing data and must be checked by a qualified, licensed engineer.